Skip to content

American-owned · Local · Family-ownedAmerican · Local · Family

Keys Door Co Call now+1 (645) 256-1794

Service

When a lift cable goes slack.

Request service+1 (645) 256-1794

Brand photograph for this page. Not a documented customer job.
About this work

Cables wind onto drums at the ends of the torsion shaft, or they run the pulley path on an extension-spring door. When one goes slack, the leaf twists. The bottom fixture, often the part people try to grab, is under whatever tension remains.

What you can see without touching

From the side, look for a cable that has jumped the drum, a fuzzy strand near the bottom corner, or a door whose top section is no longer level. That is enough to report. Do not pull the cable back onto the drum by hand.

Why salt and floodwater matter here

The bottom fixture lives in the wettest part of a grade-level Keys garage and in any South Dade garage that took water. Corrosion there lets the cable peel out of its crimp. A shiny new cable on a crumbled fixture will not hold. The visit includes the fixture, not only the wire.

Balance comes with the cable

Replacing a cable on a door whose spring is already weak just moves the failure to the next cycle. The shaft or the side springs are checked in the same stop so the new line is not asked to hold an unbalanced leaf.

Symptoms that belong on a Lift cables note

A slack cable, a frayed strand, a drum that has dumped its wraps, or a bottom fixture that has torn out of the section is the lift-line symptom. If the door is crooked and a cable is loose, do not keep cycling it.

What gets checked on a Lift cables visit

Drums, shaft, bottom fixtures, and both cables are checked together. A new cable on a chewed drum will unwrap again. The section the fixture lives in is checked for a split around the bolts.

Parts, brands, and this coast

Cables, drums, and bottom fixtures are the parts this visit is built around. A spring problem found at the same time is named as its own decision. The hardware is matched to the leaf, whether that leaf is Amarr, Clopay, or Wayne Dalton, and to the drums that are on the shaft. Salt at a bottom corner is common from Key West through Key Largo, especially on a door that faces a canal. Slab towns fail fixtures more from a struck section or a long-loose bolt.

How Lift cables is planned on this map

Cable and drum work on a canal-facing door in Marathon often includes a rusty bottom fixture. The same slack cable in Pinecrest is more often a loose wrap or a struck section. Both visits still refuse to keep cycling a crooked door. Use the town buttons so the fixture condition and the island-or-slab difference are in the plan before the van leaves Key Largo. A frayed strand at a canal-side bottom corner is named in the note so the fixture is on the truck.

Common questions

The cable is only a little frayed. Can it wait?

A few broken strands are the start of a break, not a cosmetic issue. Park the door and keep hands off the bottom corner.

Does a cable job include the rollers?

Only the rollers that are flat, seized, or out of the track. Hardware that still rolls is left in place.

Which towns use this trade?

The town buttons on this page cover the Keys and the South Dade approach. Pick the town so the note is not only a symptom.

What should wait until someone is at the opening?

Drums, shaft, bottom fixtures, and both cables are checked together.

Towns on this map

Equipment

Brands we service

Have the brand and model ready when you call +1 (645) 256-1794.

Request service

We will call you back.

  • Repairs and replacement parts
  • Openers and controls
  • New garage doors
Or call +1 (645) 256-1794

Request service

Request service

18% off salt-hardware work

We will call you back. KEYSALT18 applies to this trade only.

Call+1 (645) 256-1794Request