Skip to content

American-owned · Local · Family-ownedAmerican · Local · Family

Keys Door Co Call now+1 (645) 256-1794
Big Pine Key Torsion Spring Repair. Brand photograph, not a documented customer job.

Lower Keys

Torsion Spring Repair in Big Pine Key

Request this service+1 (645) 256-1794

The torsion spring above a Big Pine Key door stores the lift, and shade plus salt sit on that same shaft. Park the door if the header ticks or bangs, if a coil shows a gap, or if the weight suddenly doubles. Leave the set screws tight, because those screws hold the energy stored in the spring. Key Deer Boulevard is the wider approach, and a narrow refuge road with a posted speed is the last stretch. The coil is matched to this door and these drums, not to the paint on the cone.

Under the canopy

Shade makes the header dim, so a floor photo may need the lights on to show a gap. Salt and shade keep damp on the hardware, and that film is not a wire size. Tell us if the trees cover the opening all day, because a coil can look rough before it opens.

The four measures

Wire size, inside diameter, length, and wind have to match this door and the drums on the shaft. On a matched pair, both coils are usually renewed, and the bearings and cables are checked then. A stronger opener does not replace the spring, and paint on the cone is never the specification. Only a roller that is flat or seized comes off, even when salt has filmed a stem that still turns.

Posted speed and the last road

A coil chosen from the wrong numbers can make the door climb, whether the bay is shaded or bright. Park the door if the weight has doubled, and keep people off the apron beneath the leaf. The posted speed and the narrow width describe how the van reaches you, and they do not choose the spring. Write that road name with the symptom so the photo is not paired with the wrong drive.

What the picture shows

Photograph the header from the floor, and leave every set screw tight while you take it. Salt film can make a sound coil look finished when the real clue is the gap or the weight. Say which of those you have, and leave the shaft unwound until the bars are on it. An intact spring with surface scale is a different visit from a coil that has already opened.

When the door is up

If the door is open and will not close, describe it as open and keep people clear of the apron. A door that is down and simply heavy can wait for the return call that sets the visit. Leave a humming motor alone, because the head may be fine while the balance above the door is not. Shade explains the damp along the way, and the shaft is still measured before any coil is ordered.

Request this visit.

Call (645) 256-1794 about this door.

We answer any hour Sunday through Friday.

Saturday stays closed.

Keys Door Co is family-owned, local, and insured.

We have worked this coast for over ten years.

Common questions

Why mention a posted speed on the last road?

The posted speed describes that narrow last road, and it does not choose the coil on the shaft. Wire, diameter, length, and wind are read there, at the door, before anything is ordered. Shade and salt may roughen the hardware, and they still do not replace those four measures.

How do shade and salt show up on the shaft?

Shade holds damp, and salt stays on the shaft and the bearings, so a coil can look rough before it gaps. A tick, a real gap, or a doubled weight means park the door and leave the set screws tight. A floor photo with the lights on can show that gap without anyone climbing toward the header.

What should a header photo from this house include?

Show the header from the floor, lit well enough to see a gap in the dim bay. Name the road so the picture is not paired with the wrong driveway off the boulevard. Leave every set screw tight, and leave the shaft unwound while you take the picture.

Place reference: National Key Deer Refuge

Request service

Name the street and whether the door is up, down, or stuck.

  • Repairs and replacement parts
  • Openers and controls
  • New garage doors
Or call +1 (645) 256-1794

Request service

Request service

18% off salt-hardware work

We will call you back. KEYSALT18 applies to this trade only.

Call+1 (645) 256-1794Request