Upper Keys
Rolling Steel Door Repair in Tavernier
A rolling steel door is a curtain that coils on a barrel inside side guides. That assembly is separate from a house sectional and separate from a driveway gate. People search it when the curtain is stuck up, stuck down, or stopped partway. A bent guide, a hand chain, or a motor that will not turn are the other common calls. The visit covers the barrel, the guides, the slats, and the operator, and we do not file building paperwork.
Why the curtain sticks
A curtain stuck up may have a barrel that will not turn or an operator that has stalled. Stuck down means a bent guide, a damaged slat, or a lock that is thrown. Stopping partway can be a slat that has left the guide or a limit on the operator. The hand chain, when there is one, should move the barrel only if it is intact. Forcing the chain on a jammed curtain can bend slats and scar the guides.
What you can check
Leave the curtain parked where it stopped and do not hang any weight on the hand chain. Look along both guides for a bend, a popped slat, or anything jammed in the groove. See whether a bottom lock or a slide bolt is still thrown across the whole opening. Do not cut, pry, or hammer a slat back into a bent guide by hand. Keep people clear and out from under a curtain that is only partway down the guides.
Barrel guides slats operator
The visit inspects the barrel, both guides, the slats, and the operator as one system. A bent guide is straightened or replaced so the curtain has a fully straight path again. A damaged slat can be replaced when the rest of the curtain is still straight and square. The operator is serviced when the curtain is free and the motor still will not drive it. We do not file building paperwork, and the repair stays on this one curtain only.
Chain motor and the guides
Some openings use a hand chain, some use a motor, and some have both. The chain should pull evenly, and a chain that skips needs the drive looked at before more force. Side guides take the place of the vertical track a house door would use. A bumper hit low on the guide is a common reason the curtain drags at the floor. Limits on a motorized unit are set only after the curtain travels freely inside both side guides.
Damp air and storms
A basin lot in Tavernier salts the guides and the barrel sooner than an inland lot does. Humidity sits in the guide grooves and makes a curtain drag that rolled freely last month. Salt reaches the side guides and the bottom bar sooner when the opening sits closer to the water. Storms can leave a curtain partway down and pack grit into the guides. The repair is still the barrel, the guides, the slats, and the operator on that opening.
Request this visit.
Call (645) 256-1794 about this door.
We answer any hour Sunday through Friday.
Saturday stays closed.
Keys Door Co is family-owned, local, and insured.
We have worked this coast for over ten years.
Common questions
Is a rolling steel door the same as a house garage door?
A rolling steel door is a curtain on a barrel with side guides. A house sectional rides rollers in track, and a driveway gate is a different assembly. The repair stays with the barrel, the guides, the slats, and the operator.
Why is the steel curtain stuck halfway?
A slat out of the guide, a bent guide, or an operator limit can stop the curtain partway. Forcing the hand chain on a jam can bend several more slats. The visit finds which of those is holding the curtain before parts are forced.
Can one bent guide be repaired?
A bent guide can be straightened or replaced so the curtain has a straight path again. Slats that left the guide are reset only when the guide can hold them. The operator is checked after the curtain moves freely in the guides.
Request service
Name the street and whether the door is up, down, or stuck.
- Repairs and replacement parts
- Openers and controls
- New garage doors