South Dade
Rolling Steel Door Repair in West Kendall
Rolling steel repair covers a steel curtain that coils on a barrel and travels in side guides. This is a steel curtain on a barrel, not a house sectional and not a driveway gate. People call when the curtain is stuck up, stuck down, or stopped partway, when a guide is bent, or when the hand chain or the motor will not move it. Building paperwork is outside this visit.
How a stuck curtain behaves
A curtain that will not leave the open position may have a bent guide, a jammed slat, or an operator that has tripped. One that stops halfway often has a slat out of the guide or a barrel that is not turning evenly. A hand chain that spins without moving the curtain means the drive is skipping. A motor that hums and does nothing is an operator problem only after the curtain itself is free.
What to leave alone on the barrel
Do not climb the guides or pry a slat back into place while the curtain is under tension. Keep people out from under a curtain that is stuck partway. Leave the hand chain alone if pulling it harder is the only idea left, and do not keep tapping a motor that only hums. A photo from the floor of the bent guide shows where the curtain stopped.
Barrel, guides, slats, and the operator
The visit checks the barrel for even wind, the guides for bends and debris, and the slats for damage where they left the track. The operator, whether hand chain or motor, is tested only after the curtain can travel. A bent guide is straightened or replaced so the slats have a straight path. One damaged slat on an otherwise straight curtain can be a slat repair.
How this differs from a sectional door
Sectional doors ride rollers in a track and fold at hinges. A rolling steel curtain is one sheet of interlocking slats on a barrel above the opening. Side guides take the place of that track, and there is no row of panels to replace one at a time in the same way. The operator may be a hand chain, a motor, or both. We do not file building paperwork for this repair.
A wide opening that cycles in the heat
Some newer two-car tract slabs use a rolling steel curtain on a service opening, and that curtain still sits under a west-facing roof. Afternoon heat expands metal guides and makes a tight slat stick. High daily cycles, where the opening is used like a regular garage, wear the operator and the barrel ends. An occasional vehicle gate nearby is a different device from this curtain.
Request this visit.
Call (645) 256-1794 about this door.
We answer any hour Sunday through Friday.
Saturday stays closed.
Keys Door Co is family-owned, local, and insured.
We have worked this coast for over ten years.
Common questions
Is a rolling steel door the same as a sectional garage door?
A house sectional rides on rollers and hinges, and a driveway gate is a different machine. The repair stays on the barrel, the guides, the slats, and the operator.
What if the curtain is stuck halfway?
A slat out of the guide, a bent guide, or a barrel that is not winding evenly can stop it partway. Do not force the hand chain or keep running a motor that only hums. The visit frees the curtain before the operator is blamed.
Do you handle the building paperwork for a steel curtain?
The visit repairs the barrel, guides, slats, or operator that is keeping the curtain from traveling. Measurement of this opening is the part that happens on site.
Request service
Name the street and whether the door is up, down, or stuck.
- Repairs and replacement parts
- Openers and controls
- New garage doors